Creative Filters

You can apply the following filter processing to an image and save it as a separate image: Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, Water painting effect, Toy camera effect, and Miniature effect.

  1. Select [Playback: Creative filters].

  2. Select an image.

    • Use the Left keyRight key keys to select an image, then press Quick Control/Set button.
    • To select the image from index display, press the Index button.
  3. Select a filter effect ().

  4. Adjust the filter effect.

    • Adjust the filter effect, then press Quick Control/Set button.
    • For [Miniature effect], turn the Dial dial or use the Up keyDown key keys to move the white frame enclosing the area to keep in sharper focus, then press Quick Control/Set button.
  5. Save.

    • Select [OK].
    • Check the destination folder and image file number, then select [OK].
    • To apply filter processing to other images, repeat steps 2–5.

Note

  • For images captured in RAW+JPEG shooting, filter processing is applied to the RAW image, and the results are saved as a JPEG.
  • For RAW images captured at a specific aspect ratio, the resulting image is saved at that aspect ratio after filter processing.
  • Images processed using the fish-eye effect filter will not have Dust Delete Data () appended.

Creative Filter Characteristics

  • Grainy B/W

    Makes the image grainy and black and white. By adjusting the contrast, you can change the black-and-white effect.

  • Soft focus

    Gives the image a soft look. By adjusting the blur, you can change the degree of softness.

  • Fish-eye effect

    Gives the effect of a fish-eye lens. The image will have barrel distortion.

    Depending on the level of this filter effect, the area trimmed along the periphery of the image changes. Also, because this filter effect magnifies the center of the image, the apparent resolution at the center may degrade depending on the number of recorded pixels, so set the filter effect in step 4 while checking the resulting image.

  • Art bold effect

    Makes the photo look like an oil painting and the subject look more three-dimensional. By adjusting the effect, you can change the contrast and saturation. Note that subjects such as the sky or white walls may not be rendered with a smooth gradation and may look irregular or have significant noise.

  • Water painting effect

    Makes the photo look like a watercolor painting with soft colors. By adjusting the effect, you can change the color density. Note that night scenes or dark scenes may not be rendered with a smooth gradation and may look irregular or have significant noise.

  • Toy camera effect

    Shifts colors to those typical of toy cameras and darkens the four corners of the image. Color tone options can be used to change the color cast.

  • Miniature effect

    Creates a diorama effect. You can change where the image looks sharp. To switch between vertical and horizontal orientation of the sharp area (white frame), press the Left keyRight key keys in step 4 (or tap [Orientation switching] on the screen).