Video Snapshots

Configuring Video Snapshot Settings

1. Configure [: Video snapshot].

   
   • Select [Enable].

2. Configure [Album settings].

   
   • Select [Create a new album].
   • Read the message and select [OK].

3. Configure [Playback time].

   
   • Specify playback time per video snapshot.

4. Configure [Playback effect].

   
   • This setting determines how fast albums are played back.

5. Configure [Show confirm msg].

   
   • Select [Enable].

6. Check the required recording time.

   
   • The time required to record each video snapshot is indicated (1), based on the playback time and effect.

7. Close the menu.

   
   • Press the button to close the menu.
   • A blue bar is displayed to indicate the recording time (2).

Creating Video Snapshot Albums

1. Record the first video snapshot.

   
   • Press the movie shooting button to start recording.
   • The blue bar indicating recording time gradually decreases, and after the specified time elapses, recording stops automatically.
   • A confirmation message is displayed ().

2. Save as a video snapshot album.

   
   • Select [ Save as album].
   • The clip is saved as the first video snapshot in the album.

3. Record your next video snapshots.

   
   • Repeat step 1 to record the next video snapshot.
   • Select [ Add to album].
   • To create another album, select [ Save as a new album].
   • Repeat step 3 as needed.

4. Stop recording video snapshots.

   
   • Set [Video snapshot] to [Disable]. To return to normal movie recording, be sure to specify [Disable].
   • Press the button to close the menu and return to normal movie recording.

Options in steps 2 and 3

Option	Description
Save as album (step 2)	Saves the clip as the first video snapshot in an album.
Add to album (step 3)	Adds the current video snapshot to the album recorded most recently.
Save as a new album (step 3)	Creates a new album and saves the clip as the first video snapshot. This album file is different from the one recorded most recently.
Playback video snapshot (steps 2, 3)	Plays the video snapshot just recorded.
Do not save to album (step 2) Delete without saving to album (step 3)	Deletes the recently recorded video snapshot without saving it to an album. Select [OK] on the confirmation screen.

Adding to an Existing Album

1. Select [Add to existing album].

   
   • In step 2 of Configuring Video Snapshot Settings, select [Add to existing album].

2. Select an existing album.

   
   • Use the keys to select an existing album, then press .

   • Select [OK].

     Some video snapshot settings will be updated to match settings of the existing album.

3. Close the menu.

   • Press the button to close the menu.

     The video snapshot recording screen is displayed.

4. Record a video snapshot.

   • Record the video snapshot, referring to Creating Video Snapshot Albums.