Configuring 802.1X Authentication

To connect to a network requiring 802.1X authentication, configure the following settings prior to connection.

Save the certificate required for the 802.1X authentication method to the card inserted in the camera in advance ().

  1. Select [Connection: Network settings].

  2. Select [Connection option settings].

  3. Select [802.1X authentication].

  4. Select [Setup wizard].

  5. Select a protocol.

    • This transmitter supports the following protocols:

      Protocol Supported authentication method
      EAP-TLS X.509
      PEAP MS-CHAP v2
    • For the procedure hereinafter, follow the instructions displayed on the screen.