Household Power Outlet Accessory

You can power the camera with a household power outlet by using the DC Coupler DR-E18 and AC Adapter AC-E6N (each sold separately).

  1. Connect the DC coupler's plug.

    • Connect the DC coupler's plug to the AC Adapter's socket.

  2. Connect the power cord.

    • Connect the power cord as shown in the illustration.
    • After using the camera, unplug the power plug from the power outlet.

  3. Insert the DC coupler.

    • Open the battery compartment cover and insert the DC coupler securely until it locks.

  4. Pull the DC cord through the hole.

    • Open the DC cord hole cover and pass the cord through as shown.
    • Close the battery compartment cover.

Warning

  • Do not connect or disconnect the power cord when the camera's power switch is set to Power on.