Configuring Connection Option Settings

You can configure settings to use FTP transfer. You can also configure the authentication information when 802.1X authentication is used in a LAN environment.

  1. Select [Wireless settings: WFT settings].

  2. Select [Connection option settings].

  3. Select an item to configure.

FTP transfer settings

To configure the FTP transfer-related settings and power-saving function, select [FTP transfer settings].

  • Automatic transfer / Transfer type/size / Transfer with SET / Set root certif

  • Power saving

    • When this option is set to [Enable], after a certain period of idle time, the transmitter is disconnected from the LAN by being logged off from the FTP server. When the transfer of an image is executed, the transmitter automatically reconnects to the network. If you prefer not to disconnect from the LAN, set to [Disable].

802.1X authentication

Selecting [802.1X authentication] allows you to configure 802.1X authentication on the setup wizard and to confirm or delete the settings.

Set it when connecting to a network that requires 802.1X authentication.

Save the certificate required for the 802.1X authentication method to the card inserted in the camera in advance.

The file types and file names that can be read by the camera are as follows.

Type File name
Root certificate 8021X_R.CER
8021X_R.CRT
8021X_R.PEM
Client certificate 8021X_C.CER
8021X_C.CRT
8021X_C.PEM
Secret key 8021X_C.KEY

This transmitter supports the following protocols:

Protocol Supported authentication method
EAP-TLS X.509
EAP-TTLS MS-CHAP v2
PEAP MS-CHAP v2

  • Setup wizard

    • Follow the instructions on the wizard and configure the authentication settings ().

  • Confirm settings

    • Select this option to verify the contents of authentication settings.

  • Delete settings

    • Select this option to delete authentication settings. When you select [OK] on the displayed screen. the settings will be deleted.