Focus Bracketing

EOS R1R3R5R5 Mark IIR5 CR6R6 Mark IIR7R8R10R50RP90DM6 Mark II

Focus bracketing enables continuous shooting with the focal distance changed automatically after each shot. From these images, you can create a single image in focus over a wide area by using an application that supports depth compositing, such as Digital Photo Professional (EOS software).

  • Configurable functions vary depending on the camera connected.
  • For details on precautions and available functions, refer to the instruction manual of the connected camera.

  1. Click [Remote shooting mode 2] in the capture window.

  2. Click [Focus bracketing].

  3. Configure settings as needed, then click [OK].

  4. Take a picture.

    • Focus at the nearer end of your preferred focal range, then click [Shoot button].
    • Once shooting begins, remove the cursor from [Shoot button].
    • The camera shoots continuously, shifting the focal position toward infinity.
    • Shooting ends after your specified number of images, or at the far end of the focal range.