Cloud RAW Image Processing

You can upload RAW or Compact RAW images to image.canon for processing into JPEG or HEIF images. The RAW images remain the same as when captured, so you can adjust the processing conditions to create as many JPEGs or HEIFs as needed.

Caution

  • Complimentary enrollment at image.canon must be completed in advance.

    Note that cloud RAW image processing requires a paid subscription. For subscription details, visit the image.canon website.

  • Images generated by this image processing are saved on image.canon servers. The processed images are not saved to the camera.

Note

  • Before proceeding, connect the camera to image.canon ().

Checking Processing Capacity

You can check how many images you can process at image.canon.

  1. Select [Playback: Cloud RAW image processing].

  2. Select [Check proc. capacity (refresh)].

    • The camera accesses image.canon.
  3. Check the quantity in [Proc. capacity].

    • Information in [Proc. capacity] is updated.

    Caution

    • [Proc. capacity] is [0] unless you have a paid subscription for cloud RAW image processing. You will receive subscription information at the email address on record at image.canon if you check the processing capacity without a subscription.

Adding Images to Process

  1. Select [Add images to process].

  2. Select an option, then select images.

    • You can select multiple images to process at once.

    Select images

    • Turn the Quick control dial dial to select an image to process, then press the Quick Control/Set button.
    • Press the MENU button.

    Select range

    • Select the first image (start point).
    • Next, select the last image (end point). A checkmark [Check] will be appended to all the images within the range between first and last images.
    • To process other images, repeat this step.
    • Press the MENU button.
  3. Set the desired processing conditions.

    Use shot settings

    • Images are processed using image settings at the time of capture.
    • Images captured with [Shooting: HDR shooting HDR PQ] set to [Enable] are processed to create HEIFs, and images captured with this function set to [Disable] are processed to create JPEGs.

    Set up processing→JPEG/Set up processing→HEIF

    • Use Multi-controller to select an item.
    • Turn the Main dial or Quick control dial dial to switch the setting.
    • Press the Quick Control/Set button to access the function setting screen.
    • To return to the image settings at the time of shooting, press the AE lock button and select [OK] when “Revert to shot settings” is displayed.

    Comparison screen

    • You can switch between the [After change] and [Shot settings] screens by pressing the INFO button and turning the Main dial or Quick control dial dial.
    • Items in orange on the [After change] screen have been modified since the time of capture.
    • Press the MENU button to return to the processing conditions screen.
  4. Select [Save].

    • When using [Set up processing→JPEG] or [Set up processing→HEIF], select [Save and exit] (Save).
    • Read the message and select [OK].
  5. Add to the upload list.

    • Read the message and select [OK].

Checking/Removing Selected Images

  1. Select [Check/remove selected images].

  2. Browse your images.

    • Turn the Quick control dial dial to check images.
    • To remove from the upload list, press the Quick Control/Set button.

      [Check] is displayed.

    • To check image processing conditions, press the Erase button.
  3. Remove the current image from the upload list as needed.

    • Press the MENU button.

      Select [OK] when a message is displayed about removing images from the upload list.

Uploading Images

  1. Select [Send].

  2. Read the message.

    • Read the message, then tap [Send].

Caution

  • The number of images and processing capacity may not be updated correctly if an [Err 138] transmission error occurs during uploading. Note that even if the number of images and processing capacity are not updated correctly, images may be processed on the server. To check the processing status, use the image.canon app.
  • The camera continues to upload images even if [Stop] is selected on the [Send images] screen. To cancel uploading, select [OK] on the [Cancel transmission] screen while the access lamp is blinking.
  • Depending on when you select [OK] on the [Cancel transmission] screen, uploading may continue, and the images may be processed on the server.