Tab Menus: AF (Still Photos)

• AF1

  
  • (1) AF operation
  • (2) AF area
  • (3) Subject tracking
  • (4) Subject to detect
  • (5) Eye detection
  • (6) Switching tracked subjects

  Note

  • When lenses without a focus mode switch are used, [Focus mode] is displayed on the [1] tab if you have set [: switch (AF/MF)] to [Disable] ().

• AF2

  
  • (1) Case 1
  • (2) Case 2
  • (3) Case 3
  • (4) Case 4
  • (5) Case A
  • (6) Tracking sensitivity
  • (7) Accel./decel. tracking

• AF3

  
  • (1) One-Shot AF release prior.
  • (2) Preview AF
  • (3) Lens drive when AF impossible
  • (4) AF-assist beam firing

• AF4

  
  • (1) Touch & drag AF settings
  • (2) Limit AF areas
  • (3) sensitivity- AF pt select
  • (4) Orientation linked AF point

• AF5

  
  • (1) MF peaking settings
  • (2) Focus guide
  • (3) Movie Servo AF

• AF6

  
  • (1) Electronic full-time MF
  • (2) Lens electronic MF
  • (3) Focus/control ring
  • (4) Focus ring rotation
  • (5) RF lens MF focus ring sensitivity

In Basic Zone modes, the following screens are displayed.

Note that available menus vary by shooting mode.

• AF1

  
  • (1) AF area
  • (2) Subject tracking
  • (3) Subject to detect
  • (4) Eye detection

• AF2

  
  • (1) Preview AF
  • (2) AF-assist beam firing

• AF3

  
  • (1) Touch & drag AF settings
  • (2) sensitivity- AF pt select

• AF4

  
  • (1) MF peaking settings
  • (2) Focus guide
  • (3) Movie Servo AF

• AF5

  
  • (1) Focus ring rotation
  • (2) RF lens MF focus ring sensitivity