Custom Function Setting Items

You can customize camera features on the [Custom Functions] tab to suit your shooting preferences. Any settings you change from default values are displayed in blue.

C.Fn1

Exposure level increments

Sets 1/2-stop increments for the shutter speed, aperture value, exposure compensation, AEB, flash exposure compensation, etc.

  • 1/3: 1/3-stop

  • 1/2: 1/2-stop

Note

  • Display when set to [1/2-stop] is as follows.

ISO speed setting increments

You can change the manual ISO speed setting increment to a whole stop.

  • 1/3: 1/3-stop
  • 1/1: 1-stop

Note

  • Even if [1-stop] is set, ISO speed will be automatically set in 1/3-stop increments when ISO Auto is set.

Speed from metering/ISO Auto

You can set the ISO speed status after the metering timer ends in cases where, for ISO Auto operation in Program AE/Shutter-priority AE/Aperture-priority AE/Manual exposure/Bulb mode, the camera has adjusted the ISO speed during metering or during the metering timer.

  • Restore Auto after metering: Restore Auto after metering
  • Retain speed after metering: Retain speed after metering

Bracketing auto cancel

You can specify to cancel AEB and white balance bracketing when the power switch is set to Power off.

  • ON: Enable
  • OFF: Disable

Bracketing sequence

The AEB shooting sequence and white balance bracketing sequence can be changed.

  • 0−+: 0, -, +
  • –0+: -, 0, +
  • +0−: +, 0, -
AEB White Balance Bracketing
B/A Direction M/G Direction
0: Standard exposure 0: Standard white balance 0: Standard white balance
−: Underexposure −: Blue bias −: Magenta bias
+: Overexposure +: Amber bias +: Green bias

Number of bracketed shots

The number of shots taken with AEB and white balance bracketing can be changed.

When [Bracketing sequence] is set to [0, -, +], the bracketed shots will be taken as shown in the following table.

  • 3: 3 shots
  • 2: 2 shots
  • 5: 5 shots
  • 7: 7 shots
(1-stop/step increments)
1st Shot 2nd Shot 3rd Shot 4th Shot 5th Shot 6th Shot 7th Shot
3: 3 shots Standard (0) –1 +1
2: 2 shots Standard (0) ±1
5: 5 shots Standard (0) –2 –1 +1 +2
7: 7 shots Standard (0) –3 –2 –1 +1 +2 +3

Note

  • If [2 shots] is set, you can select the + or − side when setting the AEB range. With WB bracketing, the second shot is adjusted toward the negative side for the B/A or M/G direction.

Safety shift

If the subject brightness changes and the standard exposure cannot be obtained within the autoexposure range, the camera will automatically change the manually selected setting to obtain the standard exposure. [Shutter speed/Aperture] applies to Shutter-priority AE or Aperture-priority AE mode. [ISO speed] applies to Program AE, Shutter-priority AE, or Aperture-priority AE mode.

  • OFF: Disable
  • Tv/Av: Shutter speed/Aperture
  • ISO: ISO speed

Note

  • Safety shift overrides any changes to [ISO speed range] or [Min. shutter spd.] from default settings in [Shooting: ShootingISO speed settings] if standard exposure cannot be obtained.
  • The minimum and maximum limits for the safety shift with the ISO speed are determined by [Auto range] (). However, if the manually set ISO speed exceeds the [Auto range], the safety shift will take effect up or down to the manually set ISO speed.
  • Safety shift will take effect as necessary even when flash is used.

C.Fn2

Same expo. for new aperture

The maximum aperture value may decrease (the lowest f/number may increase) in Manual exposure mode (manual exposure shooting) with ISO speed set manually (except when set to ISO Auto) if you (1) Change lenses, (2) Attach an extender, or (3) Use a zoom lens with a variable maximum aperture value. This function prevents the corresponding underexposure by adjusting ISO speed or shutter speed (Tv value) automatically to maintain the same exposure as before (1), (2), or (3).

With [ISO speed/Shutter speed], the ISO speed is automatically adjusted within the ISO speed range. If exposure cannot be maintained by adjusting ISO speed, shutter speed (Tv value) is automatically adjusted.

  • OFF: Disable
  • ISO: ISO speed
  • ISO/Tv: ISO speed/Shutter speed
  • Tv: Shutter speed

Caution

  • Does not respond to changes in effective aperture value from changes in magnification when macro lenses are used.
  • Cannot provide the same exposure as before (1), (2), or (3) if [ISO speed] is set and the exposure cannot be maintained at speeds set in [ISO speed range].
  • Cannot provide the same exposure as before (1), (2), or (3) if [Shutter speed] is set and the exposure cannot be maintained at speeds set in [Custom Functions: Set shutter speed range].

Note

  • Also responds to changes in the highest f/number (minimum aperture).
  • The original exposure setting is restored if you perform (1), (2), or (3) with [ISO speed], [ISO speed/Shutter speed], or [Shutter speed] set and do not adjust ISO speed, shutter speed, or aperture value before returning the camera to the original state, before (1), (2), or (3).
  • Shutter speed may change to maintain exposure if the ISO speed increases to an expanded ISO speed when [ISO speed] is set.

AE lock meter. mode after focus

For each metering mode, you can specify whether to lock the exposure (AE lock) once subjects are in focus with One-Shot AF. The exposure will be locked while you keep pressing the shutter button halfway. Select metering modes for AE lock and add a checkmark [Check]. Select [OK] to register the setting.

Set shutter speed range

You can set the shutter speed range. In Flexible-priority AE, Shutter-priority AE, or Manual exposure mode, you can set the shutter speed manually within your specified range. In Program AE and Aperture-priority AE mode, or in Flexible-priority AE mode with shutter speed set to [AUTO], the shutter speed is set automatically within your specified range (except for movie recording). Select [OK] to register the setting.

  • Lowest speed

    Can be set in a range of 30 sec.–1/4000 sec.

  • Highest speed

    Can be set in a range of 1/8000 sec.–15 sec.

Set aperture range

You can set the aperture value range. In Flexible-priority AE, Aperture-priority AE, Manual exposure, or Bulb mode, you can set the aperture value manually within your specified range. In Program AE and Shutter-priority AE mode, or in Flexible-priority AE mode with the aperture value set to [AUTO], the aperture value is set automatically within your specified range. Select [OK] to register the setting.

  • Max. aperture

    Can be set in a range of f/1.0–f/64.

  • Min. aperture

    Can be set in a range of f/91–f/1.4.

Note

  • The available aperture value range varies depending on the lens's minimum and maximum aperture value.

C.Fn3

Dial direction during Tv/Av

Dial turning direction when setting the shutter speed and aperture value can be reversed.

Reverses the turning direction of the Main dial, Quick control dial 1, and Quick control dial 2 dial in Manual exposure shooting mode and only the Main dial dial in other shooting modes. The direction of the Quick control dial 1 and Quick control dial 2 dial in Manual exposure mode matches the direction to set exposure compensation in Program AE, Shutter-priority AE, and Aperture-priority AE modes.

  • Normal: Normal
  • Reverse direction: Reverse direction

Control ring rotation

RF lens and mount adapter control ring turning direction when setting the shutter speed and aperture value can be reversed.

  • Normal: Normal
  • Reverse direction: Reverse direction

Customize buttons

You can assign frequently used functions to camera buttons that are easy for you to use. Different functions, for use when shooting still photos or movies, can be assigned to the same button.

  1. Select [Custom Functions: Customize buttons].

  2. Select a camera control.

  3. Select a function to assign.

    • Press SET to set it.
    • You can configure advanced settings for functions labeled with [INFO] in the lower left of the screen by pressing the INFO button.

Note

  • [Custom Functions: Customize buttons] settings are not cleared even if you select [Custom Functions: Clear all Custom Func. (C.Fn)]. To clear the settings, select [Custom Functions: Clear customized settings].

Functions available for customization

AF

●: Default ○: Available for customization
Function Shutter button half-press Movie button AF-ON AE lock button AF point button Depth-of-field preview button Lens button Multifunction button SET button Multi-controller
Metering and AF start
Metering and AF start
AF stop
AF stop
AF point selection
AF point selection
Direct AF point selection
Direct AF point selection
Set AF point to center
Set AF point to center
Switch to registered AF function
Switch to registered AF func.*1
Direct AF method selection
Direct AF method selection*1
One-Shot AF/Servo AF
One-Shot AF Arrow (left/right) Servo AF*1
Eye Detection AF
Eye Detection AF*1
Touch and drag AF
Touch & drag AF
Eye detection
Eye detection
Peaking
Peaking
Focus guide
Focus guide
Drive mode
Drive mode*1

1: Cannot be assigned as a function available in movie recording.

Exposure

●: Default ○: Available for customization
Function Shutter button half-press Movie button AF-ON AE lock button AF point button Depth-of-field preview button Lens button Multifunction button SET button Multi-controller
Metering start
Metering start
AE lock *3
AE lock
AE lock (hold)
AE lock (hold)
AE lock, AF stop
AE lock, AF stop
AE lock (while button pressed)
AE lock (while button pressed)*1
AE lock/FE lock *4
AE lock/FE lock*1
Exposure compensation (hold button, turn Main dial)
Expo comp (hold btn, turn Main Dial)
Set ISO speed (hold button, turn Main dial)
Set ISO speed(hold btn,turnMain Dial)
FE lock
FE lock*1

1: Cannot be assigned as a function available in movie recording.

3: Default in movie recording.

4: Default in still photo shooting.

Image

●: Default ○: Available for customization
Function Shutter button half-press Movie button AF-ON AE lock button AF point button Depth-of-field preview button Lens button Multifunction button SET button Multi-controller
Image quality
Image quality*1
One-touch image quality setting
One-touch image quality setting*1
One-touch image quality (hold)
One-touch image quality (hold)*1
Record function and card/folder select
Record func+card/folder sel.
Still Image Aspect Ratio
ShootingCropping/aspect ratio*1
Auto Lighting Optimizer
Auto Lighting Optimizer
Picture Style selection
Picture Style
Protect
Protect
Rating
Rating

1: Cannot be assigned as a function available in movie recording.

Movies

●: Default ○: Available for customization
Function Shutter button half-press Movie button AF-ON AE lock button AF point button Depth-of-field preview button Lens button Multifunction button SET button Multi-controller
Zebra pattern
Zebra pattern*2
Movie recording
Movie recording
Pause Movie Servo AF
Pause Movie Servo AF

2: Cannot be assigned as a function available in still photo shooting.

Operation

●: Default ○: Available for customization
Function Shutter button half-press Movie button AF-ON AE lock button AF point button Depth-of-field preview button Lens button Multifunction button SET button Multi-controller
Flash function settings
Flash function settings*1
Dial function settings
Dial function settings
Depth-of-field preview *3
Depth-of-field preview*1
Reset selected item in Fv mode
Reset selected item in Fv mode*1
Reset Tv/Av/exposure/ISO in Fv mode
Reset Tv/Av/Exposure comp./ISO in Fv mode*1
Quick Control screen
Quick Control screen
Magnify or reduce
Magnify/Reduce
Image playback
Image replay
Magnify images during playback
Magnify images during playback
Register/recall shooting function
Register/recall shooting func*1
Menu display
Menu display
Touch Shutter
Touch Shutter*1
Create folder
Create folder*1
Maximize screen brightness (temporary)
Maximize screen brightness (temp)
Display off
Display off
Switch between viewfinder/screen
Switch between VF/screen
Eco mode
Eco mode
Wireless features
Wi-Fi function
No function (disabled) *4
No function (disabled)

1: Cannot be assigned as a function available in movie recording.

3: Default in still photo shooting.

4: Default in movie recording.

Note

  • [Lens button]: “AF stop button” on Image Stabilizer-equipped super telephoto lenses.

Customize dials

Frequently used functions can be assigned to the Main dial/Quick control dial 1/Quick control dial 2/Control ring dials.

  1. Select [Custom Functions: Customize dials].

  2. Select a camera control.

  3. Select a function to assign.

    • Press SET to set it.
    • You can configure advanced settings for functions labeled with [INFO] in the lower left of the screen by pressing the INFO button.

Note

  • [Custom Functions: Customize dials] settings are not cleared even if you select [Custom Functions: Clear all Custom Func. (C.Fn)]. To clear the settings, select [Custom Functions: Clear customized settings].

Functions available for dials

●: Default ○: Available for customization
Function Main dial Quick control dial 2 Quick control dial 1 Control ring
Select AF method Select AF method
Direct AF point selection Direct AF point selection
AF method (while pressing metering button) AF method (hold meter. btn)
Change shutter speed Change shutter speed
Change aperture value Change aperture value
Exposure compensation Exposure compensation
ISO Set ISO speed
Change shutter speed (while pressing metering button) Change shutter spd. (hold meter. btn)
Change aperture value (while pressing metering button) Change aperture (hold meter. btn)
Exposure compensation (hold button, turn Main dial) Exposure comp. (hold meter. btn)
Set ISO speed (hold button, turn Main dial) Set ISO speed (hold meter. btn)
Flash exposure compensation (while pressing metering button) Flash exp comp (hold meter.btn)
Shutter speed setting in M mode Shutter speed setting in M mode
Aperture value setting in M mode Aperture setting in M mode
White balance selection White balance selection
Select color temperature Select color temperature
Picture Style selection Picture Style
Select WB (while pressing metering button) Select WB (hold meter. btn)
Color temperature (while pressing metering button) Color temp. (hold meter. btn)
Select Picture Style (while pressing metering button) Select Picture Style (hold meter. btn)
No function (disabled) No function (disabled)

Note

  • Main dial and Quick control dial 2 dials cannot be customized in [Flexible-priority AE] mode.
  • Control ring: Control ring on RF lenses and mount adapters.

Clear customized settings

  1. Select [Custom Functions: Clear customized settings].

  2. Select [OK].

    • [Customize buttons] and [Customize dials] are restored to defaults.

C.Fn4

Add cropping information

Adding cropping information displays vertical lines for the aspect ratio specified in shooting, so that you can compose shots as if shooting with a medium- or large-format camera (6×6 cm, 4×5 inch, and so on).

When you shoot, instead of cropping images recorded to the card, the camera adds aspect ratio information to images for cropping in the Digital Photo Professional (EOS software).

You can import images to Digital Photo Professional on a computer and easily crop images to the aspect ratio set at the time of shooting.

  • OFF: Disable
  • 6:6: Aspect ratio 6:6
  • 3:4: Aspect ratio 3:4
  • 4:5: Aspect ratio 4:5
  • 6:7: Aspect ratio 6:7
  • 5:6: Aspect ratio 10:12
  • 5:7: Aspect ratio 5:7

Caution

  • Cropping information can only be added when [Shooting: ShootingCropping/aspect ratio] is set to [Full-frame].
  • JPEG or HEIF images are not saved at the cropped size if you use the camera to process RAW images with cropping information (). In this case, RAW processing produces JPEG or HEIF images with cropping information.

Note

  • Vertical lines indicating your specified aspect ratio are displayed on the screen.

Audio compression

Sets audio compression for movie recording. [Disable] allows higher audio quality than when audio is compressed, but file sizes are larger.

  • ON: Enable
  • OFF: Disable

Caution

  • Editing movie files recorded with [Disable] and then saving them with compression will also compress the audio.
  • Audio is compressed even if [Disable] is selected when [Movie rec quality] is set to Full HD29.97fpsIPB (Light) (NTSC) or Full HD25.00fpsIPB (Light) (PAL).

Default Erase option

You can set which option is selected by default in the erase menu (), which is accessed by pressing the Erase button during image playback or during review after shooting.

By setting an option other than [Cancel], you can simply press SET to erase images quickly.

  • Cancel: [Cancel] selected
  • Erase: [Erase] selected
  • RAW: [EraseRAW] selected
  • J/H: [Erase non-RAW] selected

Caution

  • Be careful not to erase images accidentally when an option other than [Cancel] is set.

Release shutter w/o lens

You can specify whether shooting still photos or movies is possible without a lens attached.

  • OFF: Disable
  • ON: Enable

Retract lens on power off

You can set whether to retract gear-type STM lenses (such as EF40mm f/2.8 STM) automatically when the camera's power switch is set to Power off.

  • ON: Enable
  • OFF: Disable

Caution

  • With auto power off, the lens will not retract regardless of the setting.
  • Before detaching the lens, make sure that it is retracted.

Note

  • When [Enable] is set, this function takes effect regardless of the lens's focus mode switch setting (AF or MF).

Add IPTC information

Registering IPTC (International Press Telecommunications Council) information to the camera from EOS Utility (EOS software) enables you to record (add) this information to JPEG/HEIF/RAW still photos at the time of shooting. This is helpful in file management and other tasks using the IPTC information.

For instructions on registering IPTC information to the camera and details on the information you can register, refer to the EOS Utility Instruction Manual.

  • OFF: Disable
  • ON: Enable

Caution

  • IPTC information is not added when you record movies.

Note

  • During playback, you can check whether IPTC information was added.
  • You can use Digital Photo Professional (EOS software) to check IPTC information in images.
  • IPTC information registered to the camera is not erased if you select [Custom Functions: Clear all Custom Func. (C.Fn)] (), but the setting changes to [Disable].

C.Fn5

Clear all Custom Func. (C.Fn)

Selecting [Custom Functions: Clear all Custom Func. (C.Fn)] clears all Custom Function settings except [Customize buttons] and [Customize dials].

Note

  • Performing [Custom Functions: Clear all Custom Func. (C.Fn)] does not clear settings configured in [Custom Functions: Customize buttons] and [Custom Functions: Customize dials]. To clear the settings, select [Custom Functions: Clear customized settings]. Note that although information added using [Custom Functions: Add IPTC information] is retained, the setting changes to [Disable].