Test Flash / Modeling Flash from a Receiver Unit
Push the joystick vertically.
Fire the flash.
[Test flash firing]
- A flash signal is sent from the receiver unit to the sender unit, and a wireless system test flash or modeling flash is fired.
- Modeling flash is not possible from a receiver unit with cameras released up to 2011 or with EOS REBEL T100/4000D/3000D, EOS REBEL T7/1500D/2000D, EOS REBEL T6/1300D or EOS REBEL T5/1200D.
- For the precautions related to modeling flash, see "Modeling Flash".
- When C.Fn-02-1 is set on the sender unit (), modeling flash will not be fired even if you select .