Control Customization Details

[Customized controls when shooting]

Customize buttons for shooting

You can assign common shooting functions to camera buttons that are easy for you to use. Different functions, for use when shooting still photos or movies, can be assigned to the same button.

1. Select [: Customize buttons for shooting] ().

2. Select a camera control.

   
   • To switch to [: Customize buttons for playback] (), press the button.

3. Select a function to assign.

   
   • Press to set it.
   • You can configure advanced settings for functions labeled with [] in the lower left of the screen by pressing the button.

Functions available for customization

AF

●: Default ○: Available for customization
: Metering and AF start
●*1	-	-	●	○	○	○	○	○	-	-	○	-
: AF stop
-	○*1	○	○	○	○	○	○	○	-	-	●	-
: AF point selection
-	○*1	○	○	○	●	○	○	○	○	-	○	-
: Direct AF point selection
-	-	-	-	-	-	-	-	-	-	●	-	-
: Set AF point to center
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Start/stop whole area AF tracking
-	○*1	○	○	○	○	○	○	○	●	-	○	-
: Switch to registered AF func.*1
-	-	-	○	○	○	○	○	○	-	-	○	-
: Direct AF area selection
-	○	○	○	○	○	○	○	○	○	-	○	-
: Direct select of sub to detect*1
-	○	○	○	○	○	○	○	○	○	-	○	-
: One-Shot AF Servo AF*1
-	○	○	○	○	○	○	○	○	○	-	○	-
: AF on detected subject*1
-	-	-	○	○	○	○	○	○	-	-	○	-
: Eye Detection AF*1
-	-	-	○	○	○	○	○	○	-	-	○	-
: Eye detection
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Spot detection
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Register people priority
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Focus mode
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Peaking
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Focus guide
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Register focus preset
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Playback focus preset
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Subj. detect. AF*2
-	-	○	○	○	○	○	○	○	○	-	○	-
: Drive mode*1
-	○	○	○	○	○	○	○	○	○	-	○	-

1: Cannot be assigned as a function available in movie recording.

2: Cannot be assigned as a function available in still photo shooting.

Exposure

●: Default ○: Available for customization
: AE lock, AF stop
-	○*1	○	○	○	○	○	○	○	-	-	○	-
: Metering start
○*1	-	-	-	-	-	-	-	-	-	-	-	-
: AE lock
-	○*1	○	○	○	○	○	○	○	-	-	○	-
: AE lock (hold)
-	○*1	○	○	●*4	○	○	○	○	-	-	○	-
: AE lock (while button pressed)
○*1	-	-	-	-	-	-	-	-	-	-	-	-
: AE lock/FE lock*1
-	○	○	○	●*3	○	○	○	○	-	-	○	-
: Release AE Lock
-	○*1	○	○	○	○	○	○	○	-	-	○	-
: Expo comp (hold btn, turn )
-	-	-	○	○	○	○	○	○	○	-	○	-
: ISO speed
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Set ISO speed(hold btn,turn)
-	-	-	○	○	○	○	○	○	○	-	○	-
: Flash firing*1
-	○	○	○	○	○	○	○	○	○	-	○	-
: ETTL M*1
-	○	○	○	○	○	○	○	○	○	-	○	-
: FE lock*1
-	○	○	○	○	○	○	○	○	-	-	○	-

1: Cannot be assigned as a function available in movie recording.

3: Default in still photo shooting.

4: Default in movie recording.

Image

●: Default ○: Available for customization
: Image quality*1
-	○	○	○	○	○	○	○	○	○	-	○	-
: One-touch image quality setting*1
-	○	○	○	○	○	○	○	○	○	-	○	-
: One-touch image quality (hold)*1
-	○	○	○	○	○	○	○	○	○	-	○	-
: Cropping/aspect ratio*1
-	○	○	○	○	○	○	○	○	○	-	○	-
: Switch between crop/aspect*1
-	○	○	○	○	○	○	○	○	○	-	○	-
: Digital tele-converter*1
-	○	○	○	○	○	○	○	○	○	-	○	-
: Color mode
-	○*1	○	○	○	○	○	○	●	○	-	○	-
: Picture Style
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Color filter
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Auto Lighting Optimizer
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: White balance selection
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Switch color temperature
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: WB Shift/Bkt.*1
-	○	○	○	○	○	○	○	○	○	-	○	-
: WB correction*2
-	-	○	○	○	○	○	○	○	○	-	○	-
: Record func+card/folder sel.
-	○*1	○	○	○	○	○	○	○	○	-	○	-

1: Cannot be assigned as a function available in movie recording.

2: Cannot be assigned as a function available in still photo shooting.

Movies

●: Default ○: Available for customization
: False color*2
-	-	○	○	○	○	○	○	○	○	-	○	-
: Zebra*2
-	-	○	○	○	○	○	○	○	○	-	○	-
: Movie recording
-	●*1*3	○	○	○	○	○	○	○	○	-	○	-
: Pause Movie Servo AF
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Audio Status
-	○*1	○	○	○	○	●*4	○	○	○	-	○	-
: Cinema zoom (to tele)
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Cinema zoom (to wide)
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Digital zoom*2
-	-	○	○	○	○	○	○	○	○	-	○	-
: Flicker detection*2
-	-	○	○	○	○	○	○	○	○	-	○	-
: Custom Picture*2
-	-	○	○	○	○	○	○	○	○	-	○	-
: AWB lock*2
-	-	○	○	○	○	○	○	○	○	-	○	-
: Pre-recording*2
-	-	○	○	○	○	○	○	○	○	-	○	-
: Movie self-timer*2
-	-	○	○	○	○	○	○	○	○	-	○	-
: Digital IS*2
-	-	○	○	○	○	○	○	○	○	-	○	-
: Auto level*2
-	-	○	○	○	○	○	○	○	○	-	○	-
: Standby: Low res.*2
-	-	○	○	○	○	○	○	○	○	-	○	-
: Live streaming*2
-	-	○	○	○	○	○	○	○	○	-	○	-
: Toggle rec. disp. mag.*2
-	-	○	○	○	○	○	○	○	○	-	○	-

1: Cannot be assigned as a function available in movie recording.

2: Cannot be assigned as a function available in still photo shooting.

3: Default in still photo shooting.

4: Default in movie recording.

Operation

●: Default ○: Available for customization
: Flash function settings*1
-	○	○	○	○	○	○	○	○	○	-	○	●*3
: Quick flash group control*1
-	○	○	○	○	○	○	○	○	○	-	○	○
: Dial function settings
-	○*1	●	○	○	○	○	○	○	○	-	○	-
: Maximize screen brightness (temp)
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Power off
-	○*1	○	○	○	○	○	○	○	-	-	○	-
: Screen off
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Unlock while button pressed
-	-	-	-	-	-	○	-	-	-	-	○	-
: Silent shutter function*1
-	○	○	○	○	○	○	○	○	○	-	○	-
: Switch focus/control ring
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Depth-of-field preview*1
-	○	○	○	○	○	●*3	○	○	○	-	○	-
: Reset selected item in Fv mode*1
-	○	○	○	○	○	○	○	○	○	-	○	-
: Reset Tv/Av//ISO in Fv mode*1
-	○	○	○	○	○	○	○	○	○	-	○	-
: Quick Control screen
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Magnify/Reduce
-	○*1	○	○	○	○	○	●	○	○	-	○	-
: Image replay
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Magnify images during playback
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Register/recall shooting func*1
-	-	-	○	○	○	○	○	○	-	-	○	-
: Menu display
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Manual HF anti-flicker shoot(Tv)
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Recom. Tv for HF anti-flicker shoot*1
-	○	○	○	○	○	○	○	○	○	-	○	-
: Pre-cont. shooting*1
-	○	○	○	○	○	○	○	○	○	-	○	-
: Touch Shutter*1
-	○	○	○	○	○	○	○	○	○	-	○	-
: OVF sim. view assist*1
-	○	○	○	○	○	○	○	○	○	-	○	-
: Display frame rate set.*1
-	○	○	○	○	○	○	○	○	○	-	○	-
: Wi-Fi/Bluetooth connection
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: Create folder*1
-	○	○	○	○	○	○	○	○	○	-	○	-
: Switch between VF/screen
-	○*1	○	○	○	○	○	○	○	○	-	○	-
: No function (disabled)
-	○*1	○	○	○	○	○	○	○	○	○	○	○

1: Cannot be assigned as a function available in movie recording.

3: Default in still photo shooting.

Register focus preset/Playback focus preset

You can set your preferred focus positions in advance on the camera when using RF or RF-S lenses. Saved focus preset positions can be applied by pressing a button during standby.

Registering a focus position on the camera

Focus at the focusing distance to register as a preset, then press the button assigned to [Register focus preset].

Recalling preset focus positions

Press the button assigned to [Playback focus preset].

AWB lock

You can pause auto white balance operations during movie recording by pressing the button assigned to [AWB lock] in [: Customize buttons for shooting]. To unlock it, press the button again.

Shutter btn function for movies

You can set the functions performed by pressing the shutter button halfway or completely during movie recording.

1. Select [: Shutter btn function for movies] ().

2. Select an option.

   

   • Half-press

     Specify the function performed by pressing the shutter button halfway.

   • Fully-press

     Specify the function performed by pressing the shutter button completely.

3. Select an option.

   [Half-press] options

   

   • Meter.+ Servo AF

     While you hold down the shutter button halfway, the camera will keep focusing on the subject continuously. When you press the button, the camera will focus only once.

   • Meter.+One-Shot AF

     When you press the shutter button halfway, the camera will focus only once.

   • Metering only

     Pressing the shutter button halfway starts metering. To focus, press the button.

   [Fully-press] options

   

   • With [Fully-press] set to [Start/stop mov rec], you can start/stop movie recording not only with the movie shooting button but also by pressing the shutter button completely, or by using a remote switch (sold separately).

Customize dials/control ring

Frequently used functions can be assigned to the /// dials.

1. Select [: Customize dials/control ring] ().

2. Select a camera control.

   

3. Select a function to assign.

   
   • Press to set it.
   • You can configure advanced settings for functions labeled with [] in the lower left of the screen by pressing the button.

Functions available for dials

●: Default ○: Available for customization
Function
: Change shutter speed (while holding metering button)	-	-	-	○
: Change aperture value (while holding metering button)	-	-	-	○
: Set ISO speed (while holding metering button)	-	-	-	○
: Exposure compensation (while holding metering button)	-	-	-	●
: Flash exposure comp./output (while holding metering button)	-	-	-	○
: Select AF area (while holding metering button)	-	-	-	○
: Picture Style (while holding metering button)	-	-	-	○
: White balance selection (while holding metering button)	-	-	-	○
: Select color temperature (while holding metering button)	-	-	-	○
: Change shutter speed	-	-	-	○
: Change aperture value	-	-	-	○
: Shutter speed setting in M mode	●	○	○	-
: Aperture setting in M mode	○	○	●	-
: Set ISO speed	-	●	○	○
: Exposure compensation	-	○	○	○
: Direct AF point selection	-	○	○	-
: Select AF area	-	○	○	○
: Picture Style	-	○	○	○
: White balance selection	-	○	○	○
: Select color temperature	-	○	○	○
: No function (disabled)	○	○	○	○

direction to set Tv/Av

Dial turning direction when setting the shutter speed and aperture value can be reversed.

Reverses the turning direction of the , , and dial in M shooting mode and only the dial in other shooting modes. The direction of the and dial in M mode matches the direction to set exposure compensation in P, Tv, and Av modes.

• : Normal
• : Reverse direction

direction to set Tv/Av

The direction to set the shutter speed and aperture value with the control ring of RF or RF-S lenses or mount adapters can be reversed.

• : Normal
• : Reverse direction

Switch / when shooting

Functions assigned to the Main dial and Quick control dial 2 can be reversed.

• OFF: Disable
• ON: Enable

Touch Shutter

Touch Shutter can be specified. When set to [Enable], [] display in the lower left of the shooting screen changes to [], and Touch Shutter is enabled.

For Touch Shutter instructions, see Shooting with the Touch Shutter.

Multi function lock

Specify camera controls to lock when the Multi-function lock is enabled. This can help prevent accidentally changing settings.

1. Select [: Multi function lock] (, ).

2. Select camera controls to lock.

   
   • Select a camera control and press to display [].

3. Select [OK].

   • Setting the power/multi-function lock switch to locks the selected [] camera controls.

Lens optical zoom speed

Available when using a power zoom lens.

Optical zooming is faster or slower depending on how much you turn the zoom ring.

The zoom speed during shooting standby and during movie recording can be set separately.

• Zoom speed

  Set the zoom speed.

  Fast: Suitable for zooming during shooting standby.

  Slow: Suitable when you prefer slow zooming, such as during movie recording.

• Speed level

  Set a zoom speed level (relative to the zoom speed), to zoom faster or slower depending on how much you turn the zoom ring.

  Set the speed level in a range of 1–15 for the zoom speeds [Fast] and [Slow].

Touch & drag AF settings

You can move the AF point or Zone AF frame by tapping or dragging on the screen as you look through the viewfinder.

Touch & drag AF

Select [Enable] to enable Touch and Drag AF.

Positioning method

You can set how positions are specified by tapping or dragging.

• Absolute

  The AF point moves to the tapped or dragged position on the screen.

• Relative

  The AF point moves in the direction you drag, by an amount corresponding to the amount you drag, no matter where you tap the screen.

Active touch area

You can specify the area of the screen used for tap and drag operations.

Rel. sensitivity

By setting [Positioning method] to [Relative], you can specify the amount of movement in response to tapping or dragging.

For faster AF point positioning, set toward the positive end, and for slower positioning, set toward the negative end.

AF area selection control

You can set how AF area selection methods are switched.

• : →M-Fn button

  Press the button, then the button. Each press switches the AF area.

• : →Main Dial

  Press the button, then turn the dial to switch the AF area.

sensitivity- AF pt select

You can adjust Multi-controller sensitivity, which applies to AF point positioning.

Focus/control ring

In this menu, you can configure lens [Focus/control ring] functionality.

Lenses without a focusing/control ring switch

• FOCUS: Use as focus ring

  The ring works as a focusing ring.

• CONTROL: Use as control ring

  The ring works as a control ring. To restrict [: Focus mode] to [AF], press the button and add a checkmark [] to [Focus mode is AF when used as a control ring].

Lenses for which this menu is displayed that have both focusing and control rings

• FOCUS: Use as focus ring

  No change to focusing or control ring operation.

• CONTROL: Use as control ring

  The focusing ring works as a control ring. Control ring operation is disabled.

Focus ring rotation

You can reverse the direction that the focusing ring of RF lens is rotated to adjust settings.

• : Normal
• : Reverse direction

RF lens MF focus ring sensitivity

You can set the sensitivity of the RF lens focusing ring.

• : Varies with rotation speed

  Focusing ring sensitivity varies depending on rotation speed.

• : Linked to rotation degree

  The focal position is adjusted based on the amount of rotation, regardless of the rotation speed.

[Customized controls when playback]

Customize buttons for playback

You can assign common playback functions to camera buttons that are easy for you to use.

1. Select [: Customize buttons for playback] ().

2. Select a camera control.

   
   • To switch to [: Customize buttons for shooting] (), press the button.

3. Select a function to assign.

   
   • Press to set it.
   • You can configure advanced settings for functions labeled with [] in the lower left of the screen by pressing the button.

Functions available for customization

●: Default ○: Available for customization
Function
: Protect	○	○	○	○
: Rating	○	○	●	○
: Erase images	○	○	○	○
/: Protect (image jump w/+)	○	○	○	○
/: Rating (image jump w/+)	○	○	○	○
: Cropping	○	○	○	○
: Image search	○	○	○	○
: Magnify/Reduce	○	○	○	○
: Send images to smartphone	●	○	○	○
: Transfer images to FTP server	○	○	○	○
: Image sel./transfer (FTP Server)	○	○	○	○
: Image sel./transfer (EOS Utility)	○	○	○	○
: Same as Custom. Button when shoot.	○	●	-	-
: No function (disabled)	○	○	○	●

Image jump w/

To set how the camera jumps through images, you can turn the dial on the playback screen in single-image display.

Img jump w/+

To set how the camera jumps through images, you can turn the dial while pressing the button assigned to [/] [/] on the playback screen in single-image display.

Switch / during playback

You can switch the functions assigned to these dials, as used on the playback screen.

• Disable

  Assigns [Image jump] to the dial and [Magnify/Index view] to the dial.

• Enable

  Assigns [Magnify/Index view] to the dial and [Image jump] to the dial.

[Customized controls/Reset]

Touch control

• To disable touch operations, select [Disable].

Clear all customized controls

Selecting [: Clear all customized controls] clears all control customization settings.