Wi-Fi Settings
-
Select an option.
-
Wi-Fi
Set to [Disable] where use of electronic or wireless devices is prohibited, such as on airplanes or in hospitals.
-
Wi-Fi freq. band
Select the frequency band for camera access point mode, as needed. This frequency band also applies to Wi-Fi connections established using Bluetooth functions.
-
802.1X authentication
For details, see 802.1X authentication.
-
MAC address
You can check the MAC address of the camera.
-
: Caution
-
Transferring movies
- Each movie file is large, and transferring large files over Wi-Fi may take some time. Referring to Wireless Communication Precautions, arrange your network environment for stable communication between devices and the access point.
-
Wi-Fi frequency bands
- When using [5GHz], make sure that equipment you are connecting to can also use this band.
- The camera uses the frequency band of any channel set manually in [Channel setting] ().
802.1X authentication
Selecting [802.1X authentication] enables you to set, check, or delete 802.1X authentication settings, using a setup wizard.
Configure these settings when connecting to networks that require 802.1X authentication.
First, save the certificate for the type of 802.1X authentication used to a card in the camera.
File types and names that can be loaded using this function are as follows.
| Type | File Name |
|---|---|
| Root certificate | 8021X_R.CER |
| 8021X_R.CRT | |
| 8021X_R.PEM | |
| Client certificate | 8021X_C.CER |
| 8021X_C.CRT | |
| 8021X_C.PEM | |
| 8021X_C.P12 | |
| 8021X_C.PFX | |
| Private key | 8021X_C.KEY |
Note that the camera supports following protocols.
| Protocol | Supported Authentication |
|---|---|
| EAP-TLS | X.509, PKCS#12 |
| EAP-TTLS | MS-CHAP v2 |
| PEAP | MS-CHAP v2 |
-
Setup wizard
Follow the wizard to configure the authentication settings.
-
Confirm settings
Select to check authentication settings.
-
Delete settings
Select to delete authentication settings. Selecting [OK] on the screen displayed deletes the settings.