Before Disposal

Caution

  • DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATIONS.

Note

  • A screwdriver for M1.4 Phillips head screws is recommended for screw removal.

  1. Turn the camera off.

  2. Remove the eight screws.

  3. Remove the back cover.

  4. Remove the seven screws.

    • There is no need to remove the small screws next to screw (1).

  5. Remove the front cover as shown, holding it by the side.

    • A tab that holds the cover in place is located near the top of the front cover. The tab may make it difficult to remove the cover, so gradually apply some force as you remove the cover.

  6. Remove the battery by hand as shown.