Wi-Fi Settings

  1. Select [Communication functions: Wi-Fi settings].

  2. Select an option.

    • Wi-Fi

      When the use of electronic devices and wireless devices is prohibited, such as on board airplanes or in hospitals, set it to [Disable].

    • 802.1X authentication

      Configure these settings when connecting to networks that require 802.1X authentication.

    • MAC address

      You can check the MAC address of the camera.

802.1X Authentication

Selecting [802.1X authentication] enables you to set, check, or delete 802.1X authentication settings, using a setup wizard.

Configure these settings when connecting to networks that require 802.1X authentication.

First, save the certificate for the type of 802.1X authentication used to a card in the camera.

File types and names that can be loaded using this function are as follows.

Type File Name
Root certificate 8021X_R.CER
8021X_R.CRT
8021X_R.PEM
Client certificate 8021X_C.CER
8021X_C.CRT
8021X_C.PEM
Private key 8021X_C.KEY

Note that the camera supports following protocols.

Protocol Supported Authentication
EAP-TLS X.509
EAP-TTLS MS-CHAP v2
PEAP MS-CHAP v2
  • Setup wizard

    Follow the wizard to configure the authentication settings.

  • Confirm settings

    Select to check authentication settings.

  • Delete settings

    Select to delete authentication settings. Selecting [OK] on the screen displayed deletes the settings.

Checking the MAC Address

You can check the camera's MAC address.

  1. Select [Communication functions: Wi-Fi settings].

  2. Select [MAC address].

  3. Check the MAC address.