HDR Mode

You can shoot high dynamic range photos that retain detail in highlights and shadows of high-contrast scenes. Select “Moving subjects” for scenes with subjects in motion or “Dynamic range” for landscape and still-life shots.

For enhanced gradation in dark image areas, HDR shooting produces an HDR image that compensates for loss of detail in those areas by merging multiple images captured across a wide range of exposures per shot.

HDR images are captured as HEIFs or JPEGs.

HDR stands for High Dynamic Range.

  1. Select [Shooting: HDR Mode].

  2. Select [HDR Mode shoot.].

  3. Select an option.

    • For normal, non-HDR shooting, select [Disable].

  4. Take the picture.

    • Press the shutter button completely. Multiple images captured per shot are merged into a single HDR image recorded to the card.

Moving Subjects

Suitable when shooting subjects in motion. For each shot, images captured across a wide range of exposures are merged.

  • Limit max brightness

    Available only with [Shooting: HDR shooting HDR PQ] set to [Enable].

    With [Disable], maximum brightness is not limited. Recommended when you will review images on a monitor supporting display at brightnesses exceeding 1000 nits.

    With [1000 nits], maximum brightness is limited to approx. 1000 nits.

Dynamic Range

Suitable for landscape and still-life shots. For each shot, three images of different exposures (standard exposure, underexposure, and overexposure) are captured and automatically merged.

  • Dynamic range

    Selecting [Auto] will have the dynamic range set automatically depending on the image's overall tonal range.

    The higher the number, the wider the dynamic range will be.

  • Limit max brightness

    Available only with [Shooting: HDR shooting HDR PQ] set to [Enable].

    With [Disable], maximum brightness is not limited. Recommended when you will review images on a monitor supporting display at brightnesses exceeding 1000 nits.

    With [1000 nits], maximum brightness is limited to approx. 1000 nits.

  • Continuous HDR

    With [1 shot only], HDR shooting is canceled automatically after you finish shooting.

    With [Every shot], HDR shooting continues until you set [HDR Mode shoot.] to [Disable].

  • Auto Image Align

    For handheld shooting, select [Enable]. When using a tripod, select [Disable].

  • Save source imgs

    To save the three images captured and the resulting HDR image, select [All images].

    To save only the HDR image, select [HDR img only].

Caution

  • Expanded ISO speeds (L, H) are not available in HDR shooting.
  • The flash will not fire during HDR shooting.
  • AEB is not available.
  • Subjects such as the sky or white walls may not be rendered with smooth gradation and may have noise or irregular exposure or colors.
  • HDR shooting under fluorescent or LED lighting may cause issues such as irregular exposure or colors in HDR images, due to the flickering light source. It may help reduce the effects of flickering if you set [Shooting: Anti-flicker shoot.] to [Enable] or [Shooting: HF anti-flicker shooting] to [Enable]. Note that [Shooting: HF anti-flicker shooting] is not available when [Dynamic range] is set.
  • Maximum shutter speed in HDR shooting with an electronic shutter is 1/8000 sec.

  • Precautions when set to [Dynamic range]

  • When shooting HDR images with [Auto Image Align] set to [Enable], AF point display information () and Dust Delete Data () will not be appended to the image.
  • If you perform handheld HDR shooting with [Auto Image Align] set to [Enable], image periphery will be slightly trimmed and resolution will be slightly lowered. Also, if the images cannot be aligned properly due to camera shake, etc., auto image alignment may not take effect. Note that when shooting with excessively bright (or dark) exposure settings, auto image alignment may not work properly.
  • If you perform handheld HDR shooting with [Auto Image Align] set to [Disable], the three images may not be properly aligned and the HDR effect may be reduced. Using a tripod is recommended.
  • As multiple images are captured, settings such as shutter speed and ISO speed are automatically adjusted. For this reason, even in Fv, Tv, or M mode, the shutter speed and ISO speed will change, relative to your specified shutter speed.
  • To prevent camera shake, a high ISO speed may be set.
  • Auto image alignment may not function properly with repetitive patterns (lattice, stripes, etc.) or flat, single-tone images.
  • With HDR shooting, the images will be merged, then saved to the card, so it may take some time. [BUSY] appears on the screen as images are processed, and shooting is not possible until processing is finished.

  • Precautions when set to [Moving sub.]

  • Subjects may look distorted in shots of fast-moving subjects captured with [Shooting: Shutter mode] set to [Electronic].

Note

  • Electronic first-curtain and electronic shutter modes are available with HDR set to [Moving sub.].

  • When set to [Dynamic range], the HDR images produced from RAW shooting are as follows.

    • [Shooting: HDR shooting HDR PQ] set to [Disable]: JPEG quality
    • [Shooting: HDR shooting HDR PQ] set to [Enable]: HEIF quality

    HDR image quality in RAW+JPEG or RAW+HEIF shooting corresponds to your specified JPEG or HEIF image quality.

  • Exposure simulation is not performed, even with [Shooting: Display simulation] set to an option other than [Disable], when HDR is set to [Moving sub.] or [Dynamic range].