Household Power Outlet Accessories

You can power the camera from a household power outlet with DC Coupler DR-E12 and Compact Power Adapter CA-PS700 (each sold separately).

  1. Connect the power cord.

    • Connect the power cord as shown in the illustration.
    • After using the camera, unplug the power plug from the power outlet.

  2. Insert the DC coupler.

    • Make sure the camera is off.
    • Open the card/battery compartment cover and insert the coupler with the terminals facing as shown.
    • Close the cover.

  3. Connect the adapter to the coupler.

    • Open the DC cord hole cover and insert the adapter plug fully into the coupler terminal.

Caution

  • Do not connect or disconnect the power cord when the camera’s power switch is set to Power on.