Rating Images

Rating Individual Images

1. Select [: Rating].

   

2. Select [Select images].

   

3. Select the image to be rated.

   
   • Turn the dial to select the image to be rated.

4. Rate the image.

   
   • Press the button so that the current rating is outlined in blue, as shown.
   • Turn the dial to select a rating mark, then press the button.
   • When you append a rating mark to the image, the number beside the set rating will increase by one.
   • To rate another image, repeat steps 3 and 4.

Rating by Specifying the Range

While looking at the images in the index display, you can specify the first and last images for a range to rate all the specified images at once.

1. Select [Select range].

   
   • Select [Select range] in [: Rating].

2. Specify the range of images.

   
   • Select the first image (start point).

   • Next, select the last image (end point). A checkmark [] will be appended to all the images within the range between first and last images.

   • To select other images, repeat step 2.

3. Press the button.

4. Rate the image.

   

   • Turn the dial to select a rating mark, then select [OK].

     All the images in the specified range will be rated (same rating) at once.

Rating All Images in a Folder or on a Card

You can rate all the images in a folder or on a card at once.

• Under [: Rating], when you select [All images in folder] or [All images on card], all the images in the folder or on the card will be rated.

• Turn the dial to select a rating, then select [OK].
• When you are not rating images or canceling the rating, select [].
• If the search conditions are set with [: Set image search conditions] (), the display will change to [All found images].

• If you select [All found images], all the images filtered by the search conditions will be rated as specified.