Password Management

Use these settings to manage the password entered when the power switch is set to Power on or the camera resumes operation from auto power off. For instructions on setting the password required on camera startup, see Setting a Password.

Password Request

You can choose whether a password must be entered after the power switch is set to Power on or the camera resumes operation from auto power off.

  1. Select [Set-up: Manage password] ().

  2. Select [Pword. request].

  3. Enter the password initially set.

  4. Select an option.

Changing the Password

You can change the password to enter when the power switch is set to Power on or the camera resumes operation from auto power off.

  1. Select [Change password].

  2. Enter the password initially set.

  3. Enter a new password.

    • Enter a six-digit number, then select [OK].

  4. Select [OK].

  5. Reenter the password, then select [OK].

Clearing Entered Information

You can clear password and information that has been entered on the camera.

  1. Select [Clear entered information].

  2. Select [OK].