Slide Show

You can play back the images on the card as an automatic slide show.

  1. Specify the images to be played back.

    • To play back all the images on the card, go to step 2.
    • If you want to specify the images to be played back in the slide show, filter the images with [Playback: Set image search conditions] ().
  2. Select [Playback: Slide show].

  3. Set the playback as desired.

    • Select [Set up].
    • Set the [Display time] and [Repeat] (repeated playback) settings for the still photos.
    • After completing the settings, press the MENU button.

    Display time

    Repeat

  4. Start the slide show.

    • Select [Start].
    • After [Loading image...] is displayed, the slide show will start.
  5. Exit the slide show.

    • To exit the slide show and return to the setting screen, press the MENU button.

Note

  • To pause the slide show, press the Quick Control/Set button. During pause, [Pause] will be displayed in the upper left of the screen. Press the Quick Control/Set button again to resume the slide show.
  • During the automatic playback of still photos, you can press the INFO button to switch the display format ().
  • Volume during movie playback can be adjusted by pressing the Up key Down key keys.
  • During auto playback or when playback is paused, you can turn the Quick control dial dial to view another image.
  • During auto playback, auto power off will not take effect.
  • The display time may differ depending on the image.