Exposure Compensation/AEB Setting
You can capture three images at different shutter speeds, aperture values, and ISO speeds, as adjusted by the camera. This is called AEB.
AEB stands for Auto Exposure Bracketing.
Select [: Expo.comp./AEB].
Set the AEB range.
- Turn the dial to set the AEB range (1). Press the keys to set the exposure compensation level.
- Press to set it.
- When you press the shutter button halfway, the AEB range will be displayed in the viewfinder.
Take the picture.
- Three bracketed shots are taken, according to the specified drive mode, in this sequence: Standard exposure, decreased exposure, and increased exposure.
- AEB will not be automatically canceled. To cancel AEB, follow step 2 to turn off the AEB range display.
If the drive mode is set to , press the shutter button three times for each shot. When  or  is set and you hold down the shutter button completely, the three bracketed shots will be taken consecutively and the camera will automatically stop shooting. When  or  is set, three consecutive shots are captured after a delay of 10 or 2 sec. When set to , three times the specified number of shots are taken in continuous shooting.
- You can set AEB in combination with exposure compensation.
- AEB is not available with flash, Multi Shot Noise Reduction, Creative filter, or bulb shooting.
- AEB is canceled automatically if the power switch is set to or when the flash is fully charged.