Direct Transfer

Select [: Image transfer].

Select [Image sel./transfer].

Select [Direct transfer].

Select [Sel.Image].

Select the images to transfer.

• Select the images to transfer by using , then press .
• Display [] on the screen's upper left by using , then press .
• You can turn the dial counterclockwise to switch to selecting images from 3-image display. To return to the single-image display, turn clockwise.
• To select other images to transfer, repeat step 5.
• After selecting the images, press .

Select [Direct transfer].

Select [OK].

• The selected images are transferred to the computer.

Display the [Image sel./transfer] screen.

• Perform the actions in steps 1 to 3 of Selecting the Images to Transfer.

Select [Multiple].

Select the method you want to use to select images.

• Select range

  
  • Select [Select range]. Selecting the first and last images of the range marks all the images in the range with a [], and one copy of each image will be sent.
  • To change the number of images in index display, turn the dial.

• In a folder

  
  • Selecting [Folder images not transfer'd] selects all unsent images in the selected folder.
  • Selecting [Folder images failed transf.] selects all images in the selected folder for which transfer failed.
  • Selecting [Clear folder transf. history] clears the transfer history of images in the selected folder. After clearing the transfer history, you can select [Folder images not transfer'd] and transfer all images in the folder again.

• On a card

  
  • Selecting [Card images not transferred] selects all unsent images on the selected card.
  • Selecting [Card images failed transfer] selects all images on the selected card for which transfer failed.
  • Selecting [Clear card's transf. history] clears the transfer history of images on the selected card. After clearing the transfer history, you can select [Card images not transferred] and transfer all images on the card again.

Select [Direct transfer].

Select [OK].

• The selected images are transferred to the computer.

Select [: Image transfer].

Select the type of images to transfer.

• RAW+JPEG transfer

  
  • Select [RAW+JPEG transfer], then select [JPEG only], [RAW only], or [RAW+JPEG].

• RAW+HEIF transfer

  
  • Select [RAW+HEIF transfer], then select [HEIF only], [RAW only], or [RAW+HEIF].