Charging the Battery

  1. Use the included charging cable to connect the printer to a USB AC adapter.

    • The CHARGE lamp starts to blink in green, and charging begins. Charging is complete when the lamp remains lit in green.

Note

  • Use of an optional USB Power Adapter PD-E2 or PD-E1 is recommended for charging and powering the printer. You can also use commercially available products.
  • For charging, use a battery charger with a rated output of at least DC 5.0 V, 1.5 A. Charging at room temperature takes approx. 80 min. Charging time varies greatly depending on ambient temperature and remaining capacity.