Correcting Clips

In [Effect Controls], you can do the following. Note that these features are available without [Fisheye View] selected.

Caution

  • Peripheral image areas may be missing if clips recorded with the camera tilted are corrected with parallax correction or horizontal or manual horizontal correction.

Fisheye View

Select this option to show a preview with the left and right images switched.

Parallax Correction

The application automatically compensates for the margin of error between images from the left and right lens. This option is selected by default. Note that correction may take some time, depending on the clip.

Horizontal Correction

To straighten crooked clips automatically, select [Horizontal Correction]. Note that correction may take some time, depending on the clip.

Caution

  • Not available for the following clips (). Using [Manual Horizontal Correction] is recommended.
    • Images with missing equirectangular conversion metadata

Manual Horizontal Correction

You can manually straighten clips while checking the preview.

Drag the Pan, Tilt, and Roll sliders as needed. The amount of correction, expressed as an angle, is shown to the right of each slider.

Lens Mask

You can make the appearance of the lens on the other side, as captured in clips, less noticeable. This feature can also add natural blurring to the boundary between the captured image and the background.

Caution

  • Not available for clips captured using RF-S7.8mm F4 STM DUAL.