High-speed display that switches between each shot and the live image is available when shooting with [: AF operation] set to [Servo AF] and the drive mode set to  [High speed continuous]. Display is more responsive, making it easier to follow fast-moving subjects.
Select [: High speed display].
Select an option.
- Select [Enable] for display that switches between each shot and the live image.
- Images may waver or flicker during high-speed display. This occurs more often at high shutter speeds. However, this does not affect shooting results.
- High-speed display is not performed for shutter speeds slower than 1/30 sec., aperture values higher than f/11, conditions that make autofocusing difficult, flash photography, or ISO expansion. It may also stop as you are shooting.
- High-speed display is always used when [: Shutter mode] is set to [Electronic].