Part Names

  1. (1)Catchlight panel (shown stowed)
  2. (2)Wide panel (shown stowed)
  3. (3)Flash head (light-emitting unit)
  4. (4)Modeling lamp / AF-assist beam emitter
  1. (5)Mounting foot
  2. (6)Mounting foot locking pin
  3. (7)Battery compartment cover
  4. (8)Contacts
  5. (9)Mounting foot cover

Note

  • Not equipped with remote release terminal (release cable SR-N3 cannot be used).
  1. (1)LINK Radio transmission confirmation lamp
  2. (2)LCD panel
  3. (3)SUB MENU Sub menu button
  4. (4)LAMP LAMP button
  5. (5)Undo Undo button
  6. (6)Mounting foot lock lever
  7. (7)Lock-release button
  8. (8)Bounce angle index
  1. (9)Joystick

    Camera menu Menu direct

    MODE Flash mode

    Wireless / linked shooting setting Wireless / linked shooting setting

    Flash exposure compensation / flash output setting Flash exposure compensation / flash output setting

  2. (10)Power switch

    Power ON Power ON

    LOCK Button / dial lock (Power ON)

    Power OFF Power OFF

  3. (11)Flash-ready lamp/test flash button Flash-ready lamp / test flash button
  4. (12)Select dial Select dial
  5. (13)Dust-proof and drip-proof adapter

LCD Panel

E-TTL II / E-TTL autoflash ()

  1. (1)Flash exposure compensation Flash exposure compensation
  2. (2)ETTL E-TTL II / E-TTL autoflash

    Custom flash mode 1 / Custom flash mode 2 / Custom flash mode 3 Custom flash mode*1

  3. (3)Standard Standard

    Guide number priority Guide number priority

    Even coverage Even coverage

    Bounce Bounce upward

    Short distance flash shooting Bounce downward

    Temperature increase (flash firing restriction) Temperature increase (flash firing restriction)

    Modeling lamp lit Modeling lamp lit

  4. (4)First-curtain sync First-curtain sync (normal shooting)

    Second-curtain sync Second-curtain sync

    High-speed sync High-speed sync

  5. (5)Flash exposure compensation amount
  6. (6)Effective flash range / shooting distance

    Meter Value in meters

    Feet Value in feet

  1. (7)CHARGE Charge indicator

    A Auto

    M Manual

  2. (8)Zoom Zoom indicator

    Wide panel + bounce warning Wide panel + bounce warning

    Out of flash coverage range warning Out of flash coverage range warning

  3. (9)Flash coverage (focal length)
  4. (10)Battery level indicator
  5. (11)FEB Flash exposure bracketing
  6. (12)FEB sequence
  7. (13)Flash exposure level
  8. (14)F Aperture value

1: The flash mode is identified after the indicator for the current Custom flash mode.

Manual flash ()

  1. (1)M Manual flash

    Custom flash mode 1 / Custom flash mode 2 / Custom flash mode 3 Custom flash mode*1

  2. (2)Manual flash output
  1. (3)Manual flash level

1: The flash mode is identified after the indicator for the current Custom flash mode.

Note

  • These are only examples of display. Actual display only shows current settings.
  • The LCD panel is illuminated in response to button or dial operations ().

Stroboscopic flash ()

  1. (1)MULTI Stroboscopic flash

    Custom flash mode 1 / Custom flash mode 2 / Custom flash mode 3 Custom flash mode*1

  2. (2)Flash frequency
  1. (3)Flash count

1: The flash mode is identified after the indicator for the current Custom flash mode.

Radio transmission wireless flash photography ()

  • Sender unit

    1. (1)SENDER Configured as a sender

      SUB SENDER Configured as a sub-sender

    2. (2)Radio transmission wireless Radio transmission wireless
    3. (3)Flash mode

      ETTL E-TTL II / E-TTL autoflash

      M Manual flash

      MULTI Stroboscopic flash

      Gr Group firing

      Custom flash mode 1 / Custom flash mode 2 / Custom flash mode 3 Custom flash mode*1

    4. (4)Sender flash firing ON Sender flash firing ON

      Sender flash firing OFF Sender flash firing OFF

    1. (5)Firing group control
    2. (6)Ch Transmission channel

      AUTO Transmission channel set automatically

    3. (7)Wireless radio ID
    4. (8)CHARGE Sender / receiver charge indicator
    5. (9)Modeling lamp indicator Modeling lamp indicator
    6. (10)Receiver fully charged Receiver fully charged
    7. (11)Flash ratio

    1: The flash mode is identified after the indicator for the current Custom flash mode.

    1. (1)Receiver fully charged Receiver fully charged
    2. (2)Firing group control
    3. (3)Sender / receiver charge indicator
    1. (4)Modeling lamp indicator Modeling lamp indicator
    2. (5)Group firing mode*1

    1: Gr Group firing only

    Note

    • Charge indicator 2 is no longer displayed after senders and receivers in radio transmission wireless flash photography are fully charged.
    • ETTL, M, Ext.A, and OFF are available as flash modes for Gr group firing.
    • As an indicator of modeling lamp illumination commands, Modeling lamp indicator on firing group control information does not necessarily correspond to the current status of receiver modeling lamps.
  • Receiver unit

    1. (1)Receiver Receiver
    2. (2)Ch Transmission channel
    3. (3)Wireless radio ID
    1. (4)TEST Test flash

      REL Remote release

      MODEL Modeling flash

    2. (5)RECEIVER Configured as a receiver

Radio transmission: linked shooting ()

  1. (1)LINKED SHOT Linked shooting

    Custom flash mode 1 / Custom flash mode 2 / Custom flash mode 3 Custom flash mode*1

  2. (2)SENDER Configured as a sender

    RECEIVER Configured as a receiver

  1. (3)REL Release*2

1: The flash mode is identified after the indicator for the current Custom flash mode.

2: SENDER Only when configured as a sender.

Battery Charger LC-E6 (Sold Separately)

Charger for Battery Pack LP-EL.

  1. (1)Battery slot
  2. (2)Charge lamp
  1. (3)Power plug

Battery Charger LC-E6E (Sold Separately)

Charger for the Battery Pack LP-EL.

  1. (1) Charge lamp
  2. (2) Battery pack slot
  1. (3) Power cord
  2. (4) Power cord socket

Included Accessories

  • Speedlite case

    (1) Mini stand storage pocket

  • Mini stand

    (2) Mounting part

  • Battery Pack LP-EL