Configuring Connection Option Settings
You can configure settings to use FTP transfer. You can also configure the authentication information when 802.1X authentication is used in a LAN environment.
Select [: WFT settings].
Select [Connection option settings].
Select an item to configure.
FTP transfer settings
To configure the FTP transfer-related settings and power-saving function, select [FTP transfer settings].
Automatic transfer / Transfer type/size / Transfer with SET / Set root certif
- For details, see Transferring Images to an FTP Server.
- When this option is set to [Enable], after a certain period of idle time, the transmitter is disconnected from the LAN by being logged off from the FTP server. When the transfer of an image is executed, the transmitter automatically reconnects to the network. If you prefer not to disconnect from the LAN, set to [Disable].
Selecting [802.1X authentication] allows you to configure 802.1X authentication on the setup wizard and to confirm or delete the settings.
Set it when connecting to a network that requires 802.1X authentication.
Save the certificate required for the 802.1X authentication method to the card inserted in the camera in advance.
The file types and file names that can be read by the camera are as follows.
This transmitter supports the following protocols:
|Protocol||Supported authentication method|
- Select this option to verify the contents of authentication settings.
- Select this option to delete authentication settings. When you select [OK] on the displayed screen. the settings will be deleted.