Direct Transfer

1. Select [: Image transfer].

   

2. Select [Image sel./transfer].

   

3. Select [Direct transfer].

   

4. Select [Sel.Image].

   

5. Select the images to transfer.

   
   • Select the images to transfer by using , then press .
   • Display [] on the screen's upper left by using , then press .
   • If you press the button and turn counterclockwise, you can select an image from a three-image display. To return to the single-image display, turn clockwise.
   • To select other images to transfer, repeat step 5.
   • After selecting the images, press .

6. Select [Transfer].

   

7. Select [OK].

   
   • The selected images are transferred to the computer.

1. Display the [Image sel./transfer] screen.

   • Perform the actions in steps 1 to 3 of Selecting the Images to Transfer.

2. Selecting the method of selection.

   

In a folder

• Select [Sel.].
• Select the method of selection you want to use.
  
  • Selecting [Select transfer failed images] selects all images in the selected folder for which transfer failed.
  • Selecting [Select images not transferred] selects all unsent images in the selected folder.
  • When [Sel transfer fail img ( only)] is selected, protected images in the selected folder whose transfer has failed are selected.
  • When [Sel img not transfer. ( only)] is selected, protected images in the selected folder that have not yet been transferred are selected.
  • Selecting [Clear transfer history] clears the transfer history of images in the selected folder.
  • After clearing the transfer history, you can select [Select images not transferred] and transfer all images in the folder again.
  • When [Sel img not transfer. ( only)] is selected after the transfer history has been cleared, all the protected images in the folder are transferred again.
• Select the folder.
  
• When [OK] is selected, the selected image is transferred to the PC.
  

In a card

• Select [All images].
• Select the method of selection you want to use.
  
  • When [Select transfer failed images] is selected, images stored on the card whose transfer has failed are selected.
  • When [Select images not transferred] is selected, images stored on the card that have not yet been transferred are selected.
  • When [Sel transfer fail img ( only)] is selected, protected images stored on the card whose transfer has failed are selected.
  • When [Sel img not transfer. ( only)] is selected, protected images recorded on the card that have not yet been transferred are selected.
  • When [Clear transfer history] is selected, the transfer history of images stored on the card is cleared.
  • When [Select images not transferred] is selected after the transfer history has been cleared, all the images stored on the card are transferred again.
  • When [Sel img not transfer. ( only)] is selected after the transfer history has been cleared, all the protected images stored on the card are transferred again.
• When [OK] is selected, the selected image is transferred to the PC.
  

Select range

• Select [Range].
• Selecting the first and last images of the range marks all the images in the range with a [], and one copy of each image will be sent.
• Once image selection is completed, press .
  
• When [OK] is selected, the selected image is transferred to the PC.
  

1. Select [: Image transfer].

   

2. Select the type of images to transfer.

   

   • RAW+JPEG transfer

     
     • Select [RAW+JPEG transfer], then select [JPEG only], [RAW only], or [RAW+JPEG].

   • RAW+HEIF transfer

     
     • Select [RAW+HEIF transfer], then select [HEIF only], [RAW only], or [RAW+HEIF].